Supplying Galvanized Parts

• Country: Jordan
• Summary: Supplying Galvanized Parts
• JOT Ref No: 64647220
• Deadline: 10 Apr 2022
• Financier: Self Financed
• Purchaser Ownership: Government
• Tender Value: Refer Document
• Notice Type: Tender
• Document Ref. No.: 22000239
• Purchaser's Detail:
  Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details.

  Login to see details
• Description:
• Tenders are invited for Supplying Galvanized Parts. 3/4" galvanized turntable 1 galvanized muffler 3/4 Galvanized Noble "1 Galvanized Nobility "2 Galvanized Nobility 2 galvanized y 3/4" Galvanized Hardened 2 galvanized co 3/4" galvanized reimbursement e" 1 galvanized stopper 1.1 Ambient Conditions All Fittings, materials and equipments shall be in every respect suitable for storage, installation, use and operation in the conditions of temperature, humidity and The PH and water quality appertaining in Jordan. Atmospheric temperature in Jordan varies between -10˚C and 50 ˚C. 1.2 Potable Water Certification All Fittings and materials shall be certified for potable water use, and all fittings and materials should be certified as safe for transporting potable water by an independent testing laboratory. All material in contact with or likely to come into contact with water for public shall introduced with the requirements of BS 6920 (suitability for non metallic products for use in contact with drinking water) or any equivalent standard as well as the Jordanian standard (JS 286/2008) and the requirements of EN 15664 ( influence of metallic materials on water intended for human consumption ) or any equivalent standard and the World Health Organization standard (WHO), and whenever the regulation is changed it is the supplier responsibility to ensure conformity with any new requirements. Potable water certificate submitted must be for the same batch delivered to Miyahuna, certificates must be in English from third party. 1.3 Toxic Materials Fittings and components, including their protective coatings and joint materials, that will or may come into contact with potable water shall not constitute a toxic hazard, shall not support microbial growth, shall not cause taste or odour, cloudiness or discolouration of the water and shall contain no ingredients that may migrate into water in amounts that are considered to be toxic or otherwise dangerous for health . Non toxicity certificate should be provided. 1.4 Third Party Witness The supplier must submit at least 3 different international third party companies where Miyahuna will choose one of them. The supplier shall furnish an original certificate from a third party inspection agency showing all test results and analysis required by the applicable standard (EN 10255/ BS 143) according to which the materials have been manufactured. The third party inspection agency shall under this contract. The third party inspection agency shall verify that all materials used are eligible for the relevant standard productions requirements. All certification should be from a certified and approved third party, and the certificates must be related to the same batch delivered to Miyahuna, all certificates must be valid and written in English. 1.5 Testing after delivery All materials supplied to the site in Jordan shall be subjected to acceptance tests carried out by the Royal Scientific Society. Or similar accredited authority. The test should confirm that the materials and fittings are manufactured according to EN 10255 or BS 143 or equivalent; all Tests required in this standard must be performed. If any of the tests mentioned in the standards cannot be performed by the Royal Scientific Society then the supplier should provide a third party certificate for those tests taking into considerations all the statements mentioned in “third party witness” section. All testing costs should be borne by the supplier in all cases. 1.6 Fittings Packing and Protection - All fittings must be packed in such a way to allow instant use on site without additional cleaning. - All fittings shall be securely packed in crates and boxes to prevent damage during delivery. The cost of packing shall be deemed to be included in the Contract Rates and crates will not be returned. - Fittings are normally supplied in separate cartons together with any associated small items, such as bolts and gaskets. 1. Scope of use The fitting must be according to EN 10255 or BS 143 or equivalent and shall be used with heavy series of pipes according to BS EN 10255. It must also be suitable for potable water use. 2- Designation The fittings shall be Malleable Cast-Iron Screw down pipe fittings in accordance with BS EN 10242-1995 or approved equal. Weldable Be Should Connector 3- Threading Threads must be in accordance with EN 102266-1 and EN 10226-2 and EN 10226-3 4- Working pressure Working pressure shall not be less than 16 bar with 24 bar hydrostatic pressure test. 5- Galvanization The fittings shall be (EE, GF, CRANE or equivalent in quality) , andhave an adequate corrosion protection of internal and external surfaces by mean of hot dip galvanization according BS EN ISO 1461:1999 galvanization test is required . 6- Marking Each fitting shall bear the mark of the year of manufacturer, nominal diameter, and the letter GS on the body of fitting. The marks maybe cast on, painted or cold stamped. fee: JD 25. Start selling documents: 21-03-2022. End selling documents: 06-04-2022. Deadline for offers: 10-04-2022. [Disclaimer: The above text is machine translated. For accurate information kindly refer the original document.].
• Documents:

 Tender Notice