Supply and Install a Photovoltaic System (Solar System) for One of its Centers

• Country: Jordan
• Summary: Supply and Install a Photovoltaic System (Solar System) for One of its Centers
• JOT Ref No: 94317322
• Deadline: 11 Jan 2024
• Financier: Self Financed
• Purchaser Ownership: Government
• Tender Value: Refer Document
• Notice Type: Tender
• Document Ref. No.: JRF-P-2023-041
• Purchaser's Detail:
  Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details. Login to see full purchaser details.

  Login to see details
• Description:
• Quotation are invited for Supply and Install a Photovoltaic System (Solar System) for One of its Centers (Karmah Kitchen - Muqabaline ) Located in Muqabaline by a Wheeling Method. General Terms:  The contractor is responsible for all fees required for obtaining all approvals and permits required for the project including the GIS fees.  The contractor is responsible to install a PV System based on 2023, and 2024 Energy Consumption of the facility.  It is the responsibility of the Contractor to submit all the data required from and for the JEPCOs (Jordan Electrical Company) and other related parties. 3. System Components Specifications PV Modules The photovoltaic modules have to fulfil the following technical specifications and standards, which have to be certified by an official institute if applicable:  The photovoltaic modules shall be monocrystalline PV technology, thin-film and  polycrystalline modules are excluded.  Only one supplier and one module type (one power class) are acceptable.  The output power of the crystalline module should not be less than 550 Wp at standard test condition (STC).  PV manufacturer must be from Tier 1 Solar Panels producers or Jordanian factory with production capacity more than 100 MW/year.  Operating PV temperature ranges between -40 °C & + 85 °C.  Modules temperature sensitivity at peak power should not exceed -0.34%/°C.  The PV modules frame should be made from Anodized Aluminium.  The PV modules maximum system voltage should not be less than 1,000 V.  The PV module string connectors shall be same manufacturer as used by the module manufacturer.  The PV modules should be PID resistant.  The PV modules should have a positive power tolerance and measurement uncertainty of +5% (manufacturer flasher class AAA according to IEC 60904-9).  The PV modules shall have individual serial numbers behind each front glass and on the back side of the module.  The PV modules- aluminium frame must not directly contact any dissimilar metal.  Electrical connection shall be on a robust terminal block in an IP65 junction box or higher.  The warranty for module defects after installation should be at least 12 years.  The awarded bidder shall provide a manufacture power guarantee for all PV modules that will be installed with their serial numbers that guarantees that the loss of the output is not more than 10% during the first 12 years and up to 20% in total after 25 years.  Mechanical stability - IEC 61215: Design qualification and type approval for crystalline silicon terrestrial photovoltaic (PV) modules.  PV module safety qualification standard: IEC/EN 61730 for safety class II test.  PV module shall be approved according to IEC 60068-2-68 (Blowing Sand Test) latest edition.  Along with TUV, CE compliant and UL certification, salt mist/ammonia resistance should be provided.  Mechanical load tests up to 5400 Pa, Damp Heat, Thermo Cycle and Humidity and Freeze tests.  Flash reports of PV modules (SN, Voc, Ipmax,…) shall be provided.  With the PV plant in operation and in the absence of shades, the PV modules must not exhibit hot spots or hot cells. SUBMISSION REQUIRMENTS: Vendors must include the following in their quotations:  A copy of their legal registration.  Prices excluding sales tax.  Company profile and list of references.  Bidders must provide a bid bond with 5% of the total bid value.  Bidders must provide a performance bond with 10% of the total bid value  Bidders must provide a maintenance bond with 5% of the total bid value
• Documents:

 Tender Notice